Solitaire Overseas

What Exactly Does A Heat Exchanger Do ?

The metal shells and tubes of heat exchangers transfer heat from one place to another. An exhaust/combustion by-product (also known as flue gas) enters and travels through a heat exchanger when a furnace burns natural gas or propane fuel. As the hot flue gas exits the furnace, it heats the metal. As this occurs, the hot metal heats the air circulating over the exterior of the heat exchanger. Is Manufacturer, Supplier Of ASTM A178 And ASME SA178 Tubes.

Speaking of Heat Exchangers, specialised boiler tubes are utilised in proper functioning of such exchangers. Is one leading Manufacturer, Supplier & Stockist Of ASTM A178 & ASME SA178 Tubes.

When has your furnace failed to produce enough heat for you? You probably called a technician to check it out. When the technicians determine what is wrong with your furnace, they tell you that the heat exchanger needs to be replaced.

  • Why would you need to replace your furnace if the heat exchanger is cracked? Couldn’t it just be repaired? 
  • What happens if a crack in a heat exchanger goes unattended? 
  • How exactly does this heat exchange work when it is not damaged? 

When a homeowner learns that a simple service call has turned into an expensive replacement, these are all questions they ask.

What exactly does a heat exchanger do?

It is important to note that your HVAC equipment is not responsible for producing cool energy. HVAC systems work by transferring heat (thermal energy) from one area to another. That is exactly what a heat exchanger does: it moves thermal energy from one place to another. Therefore, when it is hot outside, your HVAC system and its heat exchanger are responsible for removing thermal energy from your home and storing it when it is cold outside. Manufacturer ASTM A178 And ASME SA178 Tubes. Heat exchangers all transfer heat from one fluid to another, but they function in a variety of ways. Shell-and-tube and plate/fin heat exchangers are two of the most common types. Shell and tube heat exchangers pass one fluid through a set of metal tubes, while a second fluid passes through a sealed shell that surrounds them. It is possible for two fluids to flow in opposite directions (known as parallel flow).  

Each of these materials has its own advantages. Ceramics are especially well suited for high-temperature applications (above 1000 °C or 2000 °F) that would melt metals such as copper, iron, and steel, although they’re also popular for applications with corrosive and abrasive fluids at high or low temperatures. Plastics typically weigh less and are less expensive than metals, resist corrosion and fouling, and can be engineered to have good thermal conductivity, but tend to be mechanically weak and may degrade over time. 

ASTM A178 And ASME SA178 Tubes Are Very Useful Improving Quality & Strength Of Heat Exchanger. While plastic exchangers are generally not suitable for high-temperature applications, they could be used for everyday, room-temperature applications such as a swimming pool. Composite heat exchangers combine the best features of their parent materials—for example, the high thermal conductivity of metal with the reduced weight and the corrosion resistance of plast

When your furnace is on, hot combustible gases are sent to your heat exchanger. The heat from the combustion gases is transferred to the metal walls within the heat exchanger, causing those metal walls to heat up.

Since the walls are now heated, cold air from your house passes over those hot metal walls on the outside of the heat exchanger. It allows your home’s air to heat up without picking up those dangerous combustible gases within the heat exchanger. The warm air is then distributed throughout your home through your ductwork.

However, those dangerous combustible gases need a place to escape. Gases are blown out of the heat exchanger and vented outside of your home with standard furnaces. High-efficiency furnaces cycle those gases through a second heat exchanger, where even more heat is drawn from those gases and used to further heat your home. is a leading supplier, stockist, manufacturer & exporter of ASTM A178 & ASME SA178 Tubes. Get in touch with us for the best rates & availability. 

Get In Touch

Submit the form and get industrial units details straight to your inbox?

    Share on

    0 Responses

    1. Plastics typically weigh less and are less expensive than metals, resist corrosion and fouling, and can be engineered to have good thermal conductivity, but tend to be mechanically weak and may degrade over time.

    Leave a Reply

    Your email address will not be published. Required fields are marked *