ASTM A513 Tube Manufacturers In India / ASME SA513 Tube Suppliers, ASTM A513 Alloy Pipe, ASTM A513 Steel Tube, ASTM A513 Steel Tube, Astm A513 Tubing, A513 Type 2, ASTM A513 1010, ASTM A513 1020, ASTM A513 1026, ASTM A513 4130
High Quality ASTM A513 Steel Tube, High Quality ASME SA513 Steel Tube, ASTM A513 Steel Structural Square Tube, Astm A513 Tubing, Alloy Steel Astm A513 Tube, Alloy Steel Astm A513 Tubing, ASTM A513 Tube Manufacturers In India,best price guaranteed of ASTM A513 Tube, ASME SA513 Tube. A513 Type 1 & 2 Tubing, ASTM A513 Type 5, ASTM A513 Type 6, ASTM A513 DOM Tubing Suppliers.
SA179tubes.com produces round carbon and alloy electric resistance welded (ERW) mechanical tubing to ASTM specifications A513 Type 1A (hot rolled), Type 1B (pickled and oiled) and Type 2 (cold rolled). Produced in sizes ranging from 1.05″ OD up to 12.75″ OD and in nominal wall thicknesses beginning at 18-gauge (0.049″) and heavier, Valmont’s ASTM A513 tubing is used in a variety of industrial, agricultural and transportation-related end uses. For a complete listing of sizes produced, please visit our Steel Tubing Product Catalogue.
ASTM A513 Tubes Equivalent is DIN 17175 Grade 16Mo5, ASTM A513, ASME SA513 ASTM A513 specification covers electric-resistance-welded carbon steel tubing for use as mechanical and ornamental tubing. The ultimate tensile strength of ASTM A513 Tubes Material is calculated by dividing the area of the steel by the stress placed on it, which is expressed in terms of pounds or tons per square inch of material. Tensile strength is also an important measure of its ability to perform in an application.
ASTM A513 Tubes is a commercial and residential product which needs a tough and durable metal tubing structure that supports the ruggedness of its applications. ASTM A513 Tubes is highly durable which provides robust structural support for the heavy-duty metal products that are used every day. ASTM A513 Tubes are manufactured from low carbon steel. Which is typically available in hot rolled black and hot rolled. It is produced to closer dimensional tolerances than A500 and chemistries that allow for bending. It is used for furniture, machine components, storage racks, fences, etc.
ASTM A513 Tubes provide numerous advantageous qualities to a wide range of industries throughout the world. Some of the most distinct beneficial qualities of SA 513 Tubing are durability, work to tight tolerances and less costly. ASTM A513 Tubes Chemical Composition is iron with added carbon, phosphorus, manganese, silicon, and silver. ASTM A513 Tubes are used in a variety of agricultural, industrial, and transportation related end uses.
ASTM A513 Tubes is manufactured by using high quality carbon steel C1020 strip and it is formed and electric resistance welded into its basic shape. After annealing to produce a uniform grain structure all round, over a mandrel it is then cold drawn to give it these advantages: uniform concentricity around the central axis, denser surface, closer tolerances, uniform wall thickness, and higher physical properties.
Our steel tubes offer some of the industry’s best strength-to-weight ratios—which enables you to build cost-effective products that can endure the tough applications. Other advantages of Bull Moose steel tube:
- Leading availability and fast delivery through eight North American plants
- Special rolling options
- Broad range of finishing services
- Special packaging choices
- Potential for product-development collaboration
Our mechanical tubing is at work in an extraordinary range of markets and applications, including:
- Solar torque tube
- Seat framing
- Furniture
- Exercise equipment
- Lawn & garden equipment
- Display cases
- Fabric structures
- Greenhouse heater tubes
- Utility trailers
ASTM A513 Tubing Specification
| Sizes | 0.188” to 12.000” O.D. with 0.028” to 0.625” Wall Thickness |
|---|---|
| In Length of | Stocked in 17.000’ – 24.000’ random lengths (cut to length available) Single Random, Double Random & Required Length, Custom Size – 12 Metre lengths |
| Value Added Service | Draw & Expansion as per required Size & Length Heat Treatment, Bending, Annealed, Machining Etc. |
| End Connections | Plain, Screwed, Bevel, Threaded |
| Type | Seamless / Welded / ERW / Fabricated / CDW |
| ASTM A513/ ASME SA513 Alloy Steel Tube End | Plain End, Bevelled End, Threaded |
| Outside Coating & Finish | Black Painting, Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements |
ASTM A513 Round Steel Tube sizes
| Alloy | Size A | Wall Thickness B | Length | Weight |
|---|---|---|---|---|
| DOM 1020/1025 | 1″ | 00.065″ | 10′ | 6.49 # |
| DOM 1020/1025 | 1″ | 00.065″ | 5′ | 3.25 # |
| DOM 1020/1025 | 1″ | 00.095″ | 10′ | 9.18 # |
| DOM 1020/1025 | 1″ | 00.095″ | 5′ | 4.59 # |
| DOM 1020/1025 | 1″ | 00.120″ | 10′ | 11.28 # |
| DOM 1020/1025 | 1″ | 00.120″ | 5′ | 5.64 # |
| DOM 1020/1025 | 1-1/4″ | 00.065″ | 10′ | 8.23 # |
| DOM 1020/1025 | 1-1/4″ | 00.065″ | 5′ | 4.115 # |
| DOM 1020/1025 | 1-1/4″ | 00.095″ | 10′ | 11.72 # |
| DOM 1020/1025 | 1-1/4″ | 00.095″ | 5′ | 5.86 # |
| DOM 1020/1025 | 1-1/4″ | 00.120″ | 10′ | 14.48 # |
| DOM 1020/1025 | 1-1/4″ | 00.120″ | 5′ | 7.24 # |
| DOM 1020/1025 | 1-1/2″ | 00.065″ | 10′ | 9.96 # |
| DOM 1020/1025 | 1-1/2″ | 00.065″ | 5′ | 4.98 # |
| DOM 1020/1025 | 1-1/2″ | 00.095″ | 10′ | 14.26 # |
| DOM 1020/1025 | 1-1/2″ | 00.095″ | 5′ | 7.13 # |
| DOM 1020/1025 | 1-1/2″ | 00.120″ | 10′ | 17.69 # |
| DOM 1020/1025 | 1-1/2″ | 00.120″ | 5′ | 8.845 # |
| DOM 1020/1025 | 1-1/2″ | 00.250″ | 10′ | 33.38 # |
| DOM 1020/1025 | 1-1/2″ | 00.250″ | 5′ | 16.69 # |
ASTM A513 Grade 1026 Tube Types
- ASTM A513 T5 DOM tubing cold drawn honed tube
- DOM Steel Tube Welded Carbon Steel Pipe
- SA 513 ERW DOM tube
- Welded Precision Cold Drawn DOM Steel Tube
- DIN 2391 ST37.4 ST52.4 precision dom e355 tube
- ASTM A513 4130 Cold Drawn Welded DOM Steel Tube
- ASTM A513 1026 Dom Tube Honed Cylinder Pipe
- ASTM API Standard dom steel tube
- Hydraulic Cylinder Honed Dom Tube
Advantages and Benefits of ASTM A513 Tubes
- Durable material
- Suitable to tight tolerances
- Consumer product applicable
- Economical price
ASTM A513 Chemical Composition
|
Grade Designation |
Chemical Composition Limits, % |
|||
|---|---|---|---|---|
|
Carbon |
Manganese |
Phosphorus, max |
Sulphur, max |
|
|
1010 |
0.05-0.15 |
0.30-0.60 |
0.035 |
0.035 |
|
1015 |
0.10-0.20 |
0.30-0.60 |
0.035 |
0.035 |
|
1020 |
0.15-0.25 |
0.30-0.60 |
0.035 |
0.035 |
|
1026 |
0.22-0.28 |
0.60-0.90 |
0.035 |
0.035 |
A513 Round and Square Steel Tube Hardness Limits and Tensile Properties
Yield Stress, Ksi (MPa), min |
Ultimate Stress, ksi (MPa), min |
Elongation in 2 in. or 50 mm. % min |
RB min |
RB max |
|
|---|---|---|---|---|---|
|
As-Welded Tube / Tubing |
|||||
|
1008 |
30 (207) |
42 (290) |
15 |
50 |
|
|
1010 |
32 (221) |
45 (310) |
15 |
55 |
|
|
1015 |
35 (241) |
48 (331) |
15 |
58 |
|
|
1020 |
38 (262) |
52 (359) |
12 |
62 |
|
|
1026 |
45 (310) |
62 (427) |
12 |
68 |
|
|
Normalised Tube / Tubing |
|||||
|
1008 |
23 (159) |
38 (262) |
30 |
65 |
|
|
1010 |
25 (172) |
40 (276) |
30 |
65 |
|
|
1015 |
30 (207) |
45 (310) |
30 |
70 |
|
|
1020 |
35 (241) |
50 (345) |
25 |
75 |
|
|
1026 |
40 (276) |
60 (414) |
25 |
85 |
|
|
Sink-Drawn Tube / Tubing |
|||||
|
1008 |
38 (262) |
38 (262) |
8 |
65 |
|
|
1010 |
40 (276) |
40 (276) |
8 |
65 |
|
|
1015 |
45 (310) |
45 (310) |
8 |
67 |
|
|
1020 |
50 (345) |
50 (345) |
8 |
70 |
|
|
1026 |
55 (379) |
55 (379) |
7 |
77 |
|
|
Mandrel-Drawn Tubing |
|||||
|
1008 |
50 (345) |
60 (414) |
5 |
73 |
|
|
1010 |
50 (345) |
60 (414) |
5 |
73 |
|
|
1015 |
55 (379) |
65 (448) |
5 |
77 |
|
|
1020 |
60 (414) |
70 (483) |
5 |
80 |
|
|
1026 |
70 (483) |
80 (552) |
5 |
85 |
|
|
Mandrel-Drawn Stress-Relieved Tubing |
|||||
|
1008 |
45 (310) |
45 (310) |
55 (379) |
12 |
68 |
|
1010 |
45 (310) |
45 (310) |
55 (379) |
12 |
68 |
|
1015 |
50 (345) |
50 (345) |
60 (414) |
12 |
72 |
|
1020 |
55 (379) |
55 (379) |
65 (448) |
10 |
75 |
|
1026 |
65 (448) |
65 (448) |
75 (517) |
10 |
80 |
Specification Notes
- ASTM A513 covers carbon steel grades starting at 1008 and higher in addition to specified alloy steels. Please visit our Finishes & Chemistries page for a listing of our standard chemistry capabilities.
- Physical testing (yield, tensile and elongation) is not required under A513. If there is a specific strength requirement for your application, please be sure to include it at the time of inquiry as that will affect the chemistry required.
- Flash control of the ID weld bead is discussed in section 12.3 to 12.3.4 of the specification. Valmont produces tubing to flash control 0.015″ maximum, 0.010″ maximum, 0.005″ maximum and flash in.
- Valmont does not produce tubing to meet ASTM A513 Type 3, 4, 5 and 6. Depending upon actual tolerances requested; however, Valmont’s ability to produce tubing to tolerances tighter than A513 Type 1 and 2 allows us to explore options to replace ASTM A513 Type 5 DOM (drawn over mandrel) tubing. Please inquire with one of our knowledgeable salespeople if your needed tolerances lie between A513 Type 1 or 2 and A513 Type 5 so that we can explore alternatives to draw over mandrel.
- ASTM A787 is a related mechanical tubing specification that covers metallic coated (galvanised, hot-dip galvanised, aluminized and galvannealed) carbon steel tubing. Please refer to the ASTM 787 page for more information.
Heat Analysis
An analysis of each heat of steel shall be made by the steel manufacturer to determine the percentages of the elements specified; if secondary melting processes are employed, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The heat analysis shall conform to the requirements specified, except that where the heat identity has not been maintained or where the analysis is not sufficiently complete to permit conformance to be determined, the chemical composition determined from a product analysis made by the tubular manufacturer shall conform to the requirements specified for heat analysis. When requested in the order or contract, a report of such analysis shall be furnished to the purchaser.
ASTM A513 Steel Tube Price/Rate
- A335 P1 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P2 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P5/5b/5c/ Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P9 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P11 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P12 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P22 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P23 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P91 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - A335 P92 Alloy steel Seamless Pipe
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T2 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T5 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T5b Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T5c Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T9 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T11 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T12 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T22 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T23 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T91 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A213 T92 Alloy steel Seamless Tube
US $800 – 1,500 / Ton (FOB Price) - ASTM A513 Steel Tube / Alloy Steel Welded Tube
US $750 – 900 / Ton (FOB Price) - Alloy Steel Plate
US $800 – 1,500 / Ton (FOB Price) - Alloy Steel SA 387 Plate
US $800 – 1,500 / Ton (FOB Price) - ASTM A182 Alloy Steel Round Bar
US $800 – 1,500 / Ton (FOB Price) - ASTM A234 Alloy Steel Buttweld Pipe Fittings
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 90° Long Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 90° Short Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 45° Long Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 45° Short Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 180° Long Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel 180° Short Radius Elbow
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Equal Tee
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Reducing Tee
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Cross
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Reducing Cross
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Concentric Reducer
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Eccentric Reducer
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Pipe Cap
US $0.5-2000 / Piece (FOB Price) - ASTM A234 Alloy Steel Stub End
US $0.5-2000 / Piece (FOB Price) - Alloy Steel AISI 4130 Fittings
US $0.5-2000 / Piece (FOB Price) - ASTM A182 Alloy Steel Threaded Fittings
US $0.5-2000 / Piece (FOB Price) - ASTM A182 Alloy Steel Socket Weld Fittings
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Welding Neck Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Threaded Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Slip-On Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Socket Weld Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Lap Joint Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Blind Flange
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Orifice Flange and Plate
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy steel Spectacle Blind
US $0.68-1000 / Piece (FOB Price) - ASTM A182 Alloy Steel Weldolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Sockolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Threadolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Nipolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Latrolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Elbolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Sweepolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Insert Weldolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Coupolet
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Flexolet Butt Weld
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Flexolet Socket Weld
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Flexolet Threaded
US $1.01-668.8 / Piece (FOB Price) - ASTM A182 Alloy Steel Nipoflange
US $1.01-668.8 / Piece (FOB Price) - ASTM A325 Alloy steel Fasteners
US $0.0001 – 1 / Set (FOB Price) - ASTM A325 Alloy steel Bolts / Screws / Studs
US $0.0001 – 1 / Set (FOB Price)
Why choose us
With years of experience with companies and projects around the world, Total Piping Solutions Steels brings world-class expertise to materials acquisition.
- Total Piping Solutions Steels ships directly from the mill to the buyer, eliminating the cost of stocking and providing significant savings to its customers.
- ISO 9001:2008 certified & Govt. of India recognised export house
- All of Total Piping Solutions’s manufacturers are ISO certified and all linepipe and plate providers are API certified.
- ASTM A513 Steel Tube Inventory- We have wide range of sizes and grades inventory
- Specialised in Pipe/Tube/Tubing & Sheet/Plate
- We supply ASTM A513 Steel Tube in small & large quantity
Application Industry Of Astm A513 Tubes
- Petrochemical Industry
- Chemical Industry
- Oil and Gas Industry
- Pulp & Paper Industry
- Power Plant Industry
- Food Processing Industry
- Pharmaceuticals Industry
- Energy Industry
- Aerospace Industry