A420 WPL6 fittings are used in environments where the temperature range is low. A420 is basically a standard specification for pipe fittings that are of alloy steel or carbon steel. SA420 WPL6 fittings are essentially pipe fittings which are created to be used in low temperatures. As such, these types of fittings can be used even in temperatures as low as -50 °F. These are low temperature carbon steel fittings that have been created specifically for use in low-temperature environs, primarily for use with welded pressure vessels. A429 has been Charpy Impact tested at -50 °F.
Forming or forging of ASTM A420 WPL6 fittings is done by extruding, pressing, fusion-welding, piercing, hammering, machining, working, bending or by combining a couple or more of the aforementioned processes. If these fittings happen to be cold forming, such as the likes of tees, to proceed further, what is required is a magnetic particle exam or a penetrant test. Heat treatment of SA 420 WPL6 pipe fittings can be done in the quenched and tempered condition, normalized and tempered condition, annealed condition or in the normalized condition. These fittings can be used in deep sea water projects, winter projects and cold weather projects. WPL6 is that grade of carbon steel that is normalized and has a Charpy Impact that has been tested at -50 °F.
A420 fittings are supplied by us in various dimensions, thicknesses, diameters and sizes and they are also tailor-made by us, based on the specific needs of clients. These fittings can be procured from us in various forms such as instrumentation, hydraulic fitting, compression fitting and as per drawing. These fittings can be obtained in two types, seamless and welded. To ensure that these fittings conform to national and international quality standards, we pass these fittings of ours through various, very tough quality tests. These quality tests include the likes of: Spectro Analysis, Flaring Test, PMI Testing, Tensile of Area Test, Pitting Resistance Test, Intergranular Corrosion Test, Flattening Test, Hardness Test, Micro and MacroTest, etc. It is only when these fittings have successfully passed all these stringent quality tests, do we then send them to our clients located in all corners of the planet. We supply these fittings with accurate dimensions and they have very good durability. They are used in various industries like petroleum, machinery, etc.
When you think of ordering A420 fittings, you can be sure of one thing, we are a leading name in the manufacturing, exports, stocking and supply of these types of fittings. No matter where you might be located in the world, our highly efficient customer service team, will ensure that you get fast delivery of your order, irrespective of the size of your order. We manufacture these fittings only from the very best raw materials. We even supply our clients with Material Test Certificates (MTC) as per EN 10204 3.2/EN 10204 3.1 and also Test Certificates certifying NACE MR0175/NACE MR0103. No matter what your requirement might be for A420 fittings, be sure to talk to us, you will be pleased you did, of this we assure you!