Astm A333 Pipe & Asme Sa333 Pipe Fall Under The Specification Of Astm A333 / Asme Sa333. Asme Sa333 Are Considered To Be The Standard Specifications For Welded And Seamless Pipes, That Are Meant For Use In Processes That Deal In Low Temperatures And Also Other Processes That Need Notch Toughness. Pipes Under The Standard Specifications Of Astm A333 Pipe Are Manufactured By The Process Of Welding Or Seamless And In This Welding Process, No Filler Metal Is Added. All These Astm A333 Pipe Which Are Seamless Or Welded, Are Treated In Such A Way, So That Their Microstructure Is Controlled. The Treating Of The Microstructure Is Done By Employing The Following Techniques:
- As Per Section 4.2.2.2, A333 / A333M – 05, Double Normalization And Tempering Is Done.
- As Per Section 4.2.1.3, Section 4.2.1.2 Or Section 4.2.1.1 – A333 / A333M– 05, Normalization Is Done.
- As Per Section 4.2.2.1, A333 / A333M, Quenching And Normalization Is Done.
Based On Certain Needs, Various Tests Are Carried Out On These Astm A333 Pipe, Such As Nondestructive Electric Tests, Tensile Tests, Hydrostatic Tests And Impact Tests. Forming Of Asme Sa333 Pipe Can Be Readily Accomplished By Using Common  Techniques. Regarding Annealing Of Astm A333 Grade 6 Pipe, These Can Be Annealed Or They Can Be Normalized At 1600 °F And Then They Need To Be Air Cooled. Aging Is Not Applicable Where Asme Sa333 Pipe Are Concerned. We Regularly Supply Astm A333 Grade 6 Pipe To USA, UK, Saudi Arabia, UAE, Europe, Germany, Jordan, Australia, Kuwait, Etc.
Solitaire Overseas Is One Of The Leading Global Suppliers Of Astm A333 Pipe & Asme Sa333 Pipe. We Deliver These Pipes To Clients All Over The Globe In Various Shapes, Sizes And Specifications. Also, Our Company Can Tailor-Make These Pipes, To Suit The Specific Needs Of Clients. Due To Their Characteristics And Properties, Astm A333 Pipe Is Used In Various Applications And Industries Of The Likes Of Sea Water Equipment, Power Generation, Pharmaceutical Equipment, Off-Shore Oil Drilling Companies, Heat Exchangers, Specialty Chemicals, Petrochemicals, Chemical Equipment, Gas Processing, Condensers, Pharmaceuticals And Pulp And Paper Industry. For The Welding Of Asme Sa333 Pipes, Conventional Methods Can Be Applied. Sa333 Gr 6 Pipe Need To Be Limited To A Heat Of Up To 300 °C (570 °F). It Is Not Recommended That Preheating Be Done Of Sa333 Gr 6 Pipe And Also There Is No Need For Post Weld Heat Treatment Of These Pipes. In The Event That Multi–Pass Welding Is Carried Out Of Sa333 Gr 6 Pipe, It Is Imperative That The Weld Should Be Allowed To Cool Down To A Temperature Of Less Than 150 °C (300 °F) Before Continuing.
In The Manufacturing Process Of Astm A333 6 Pipe, It Is Critical That To The Shielding Gas, Hydrogen Should Not Be Added, This Is Necessary So As To Prevent The Risk Of Cold Cracking Occurring In The Weld Zone. However, If It Is Required, Just So As To Compensate For Any Loss Of Nitrogen That Might Occur In The Weld Zone, What Can Be Added Is A Small Quantity Of N2 Gas. Great Care Has To Be Taken With The Chemical Requirements Of Astm A333 Pipe & Asme Sa333 Pipe In That For Every Reduction That Is Done Of 0.01% Carbon That Is Less Than 0.30%, There Would Be An Increase Of 0.05% Manganese Which Would Be More Than 1.06% That Would Thus Be Allowed And This Would Be To A Limit Of 1.35% Manganese. Regarding The Heat Treatment Of Asme Sa333 Pipes, We Supply These Pipes In The Normalized, 1500 °F And Air Cooled Condition And These Pipes Can Be Quenched And Tempered By Heating Them To 1475 °F, Quenching Them In Water That Is Circulating And Then Tempering Has To Be Done By Reheating Astm A333 Pipe To 1100 °F And This Must Be Followed By Rapid Air Cooling. Astm A333 6 Pipes Are In Big Demand For Use In Compressed Gas Pressure Piping, As Even The Smallest Crack Here, Could Result In Disastrous Consequences.
Astm A333 Grade 6 Pipe Includes Average Carbon Steel Pipes Of Welded Carbon And Wall Seamless, Meant For Use In Low Temperature Environs. Astm A333 Grade 6 Pipe Can Also Be Procured In Various Ferritic Steel Grades. SA333 Grade 6 Pipes Are Basically Pipes Of Low Temperature Seamless Carbon Steel. They Have Been Designed For Use In Environs Where There Are Cold Temperatures Of Up To Minus -45 °C (-50 °F). The Properties Of Astm A333 Grade 6 Seamless Pipe Are Very Similar To Those Of Aisi 4032 Steel. The Machinability Of ASME SA333 Grade 6 Pipe Is Superb And It Is Very Akin To That Of Alloy 4032 Steel. Asme Sa333 Carbon Steel Pipe Covers The Following Specifications: Astm A369 (Fpb), Astm A333 Grade 6, Uns K03006, Astm A106 (B), Astm A334 Grade 6, Astm A556 (C2) And Astm A234 (Wpb). Cold Working Of Astm A333 Grade 6 Pipes Can Be Carried Out By Using Conventional Methods. Hot Working Of These Grade 6 Pipes Can Be Carried Out At 2000 °F, Down To 1600 °F, If The Need So Arises. As Soon As Hot Working Is Completed, The Pipes Have To Be Cooled In A Furnace Which Has A Controlled Atmosphere, From A Temperature That Is More Than 1550 °F. It Is Very Important To Note That Hot Working Should Not Be Done Below 1550 °F.
Our Company Delivers Asme Sa333 Pipe In Lengths That Can Be To Specifications Catering To Specific Needs Of Clients. In The Event That There Is No Specific Length That Is Required, These Pipes Are Manufactured As: Double Random Lengths: 36′ – 44′ And Single Random Lengths: 17′ – 24′. We, Solitaire Overseas, Have The Technical Expertise And The Infrastructure That Has Made Us Forerunners In The Manufacture Of Astm A333 Grade 3 Pipe. Our Quality Matches The Best In The World And Our Pricing, It Is The Best Deal That You Can Get. For All Your Needs Of Astm A333 Pipe Be Sure To Call Us, You Will Be Happy You Did.
